Skip to product information
1 of 1

Multiquip FXA60A6 High-Cycle Concrete Vibrator

Multiquip FXA60A6 High-Cycle Concrete Vibrator

SKU: SKU:FXA60A6

Regular price $2,124.00
Regular price Sale price $2,124.00
Shipping calculated at checkout.
COMPLETE YOUR BUNDLE
Multiquip FXA60A6 High-Cycle Concrete Vibrator

Multiquip FXA60A6 High-Cycle Concrete Vibrator

$2,124.00
$5,499.99
$3,810.00

What You’ll Receive

Everything included with your purchase, clearly explained.

Trusted by contractors nationwide

"Great products and even better customer service. Highly recommend for contractors."

Fast
Shipping
100%
Satisfaction Guarantee
Expert
Customer Support

FXA60A6 High-Cycle Concrete Vibrator

2.375" head, 20' hose, 33' cord, 180 Hz,

High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load.
  • Powered by a 4.5-amp electric motor
  • Permanently lubricated oversized head bearings for unmatched durability
  • Hose can be extended to 45 feet (13.5 meters)
  • Waterproof control box
  • Optional 50- and 100-foot (15, 30 meters) extension cords available
  • Requires high-cycle generator GDP5H

 

The FXA60A6 High-Cycle Concrete Vibrator from Multiquip is an elite, high-frequency vibration solution for construction professionals tackling demanding low-slump and high-strength concrete projects. Designed with industrial-grade components and advanced engineering, the FXA60A6 stands at the forefront of jobsite productivity and mix consolidation, especially when challenging mixes and extended reach are required.


FXA60A6 High-Cycle Concrete Vibrator: Product Overview

The Multiquip FXA60A6 is a premium high-cycle internal vibrator, purpose-built for commercial slabs, bridge decks, precast concrete, heavy marine work, or any pour demanding deep and uniform consolidation. Taking its power from a 180 Hz, 230V three-phase power supply (usually a compatible high-cycle generator), the FXA60A6 delivers high-amplitude, quick-penetration vibration—breaking through stiff, low-slump mixes, around dense rebar, and into hard-to-reach forms while retaining nearly all of its output power under load.


Key Features and Industrial Benefits

  • High-Frequency Performance: Delivers 10,800 vibrations per minute (VPM) at 180 Hz for superior penetration in low-slump or high-strength mixes, maximizing productivity and finish quality.

  • Large 2-3/8" (60 mm) Vibrator Head: With a 19.25" (49 cm) length and a 20-foot (6 m) long abrasion-resistant hose, it achieves a substantial area of influence for even the deepest or widest forms.

  • Oversized, Permanently Lubricated Bearings: Engineered for unmatched durability and smooth continuous operation—minimizing downtime for maintenance or service.

  • Robust, Waterproof Control Box: Allows for confident use in rainy, splash-prone, or damp jobsite environments.

  • Extensible Reach: Hose can be extended up to 45 feet (13.5 m) for remote or challenging placements, and is supported by optional 50- and 100-foot rated extension cords.

  • High-Cycle Generator Compatibility: Specifically designed for use with a GDP5HA or equivalent high cycle generator, providing consistent three-phase power for unfaltering work in difficult jobsite locations.

  • Power Retention: Retains at least 95% of output power under heavy load, eliminating performance dips common to conventional electrical vibrators.


Technical Specifications

Feature Specification
Head Diameter 2-3/8" (60 mm)
Head Length 19.25" (49 cm)
Hose Length 20 ft (6 m)
Cord Length 33 ft (10 m)
Frequency 180 Hz (high-cycle)
Vibrations Per Minute 10,800 VPM
Amperage 4.5A (at 230V, 180 Hz, 3-phase)
Centrifugal Force 1,600 lbs
Amplitude 0.079" (2.0 mm)
Recommended Extension Up to 45 ft (13.5 m) max hose
Weight 65 lbs (varies, with head/hose)
Control Box Rating Waterproof, outdoor-grade



Performance for Heavy-Duty Applications

The FXA60A6 is ideal for:

  • Bridge decks and civil infrastructure

  • Commercial, industrial, or precast slabs

  • Marine or heavy mass-concrete placements

  • Large tilt-up panels and architectural forms

  • Projects with dense rebar or limited access

Because the high-cycle vibrator uses a motor-in-head design, it maintains strength and vibration speed without losses associated with long flex-shaft or cable drives. This results in superior consolidation, fewer lift defects, and uniform surface finishes.


Jobsite Durability and Operator Confidence

  • Oversized, Permanently Lubricated Bearings: Extend component life, provide whisper-smooth vibration, and massively reduce required service intervals.

  • Tough Outer Casing and Hose: Abrasion-resistant, kink-proof design holds up under rough handling, scaffold drops, and heavy site use.

  • Waterproof Controls: Ensure continued operation and safety, even in foul weather or exposed placements.


Maintenance, Upkeep, and Expandability

  • Minimal Routine Service: With permanently lubricated, oversized head bearings and pre-sealed electronics, the FXA60A6 can run hours on end with just periodic visual inspection.

  • Optional Accessories: Factory extension cords (50 or 100 ft) for long runs, replacement hoses and heads, storage bags, or generator systems extend service value and utility.


FXA60A6 vs. Standard and Flex-Shaft Electric Vibrators

Feature FXA60A6 High-Cycle Standard Electric Gas Flex-Shaft
Power Source 180 Hz, 3-phase 60 Hz, single-phase (120V) Gasoline engine
Amplitude/Frequency 0.079"/10,800 VPM 0.05–0.07"/8,000–12,000 0.07"/8,000–12,000
Output Power Retention 95%+ under load 50–70% under heavy load 60–90% typical
Effective Reach Up to 45 ft (hose) Up to 14 ft (flex shaft) Up to 35 ft (flex shaft)
Applications Low-slump, heavy mix General/conventional use Remote pours/no power
Maintenance Minimal Brushes, lube, frequent Engine, fuel, lube, cable



High-Cycle Power: The Key to Superior Concrete

  • Consistency Across Large Pours: No drop in vibration even as hose length increases—crucial for hard-to-pour mixes, precast panels, and deep columns.

  • Ultra-Efficient Consolidation: Targets tough, heavily reinforced placements and allows crews to pour stiffer mixes, improving slab strength and reducing bug holes.

  • Reduced Operator Fatigue: The high-frequency, low-amplitude vibration transmits less harsh feedback to the operator, supporting long, demanding placements.


Why Contractors Rely on the FXA60A6

The Multiquip FXA60A6 High-Cycle Concrete Vibrator is the industry’s standard for serious civil, commercial, and high-strength jobs—where every second counts and every lift must meet specifications. With superior durability, consistent power, waterproof controls, and vast reach, it guarantees fast, flawless consolidation—pour after pour.

View full details
Multiquip FXA60A6 High-Cycle Concrete Vibrator

Multiquip FXA60A6 High-Cycle Concrete Vibrator

Regular price $2,124.00
Regular price Sale price $2,124.00