10 Blade

by Blades Admin June 27, 2025

ROC Abrasives: 10 Inch Diamond Blade — Precision, Durability & Cutting Versatility

When it comes to demanding job-site cutting—whether tackling brick, block, concrete, pavers, or porcelain—a 10 inch diamond blade that delivers consistent performance is essential. ROC Abrasives offers a standout 10″ blade in its Crusher Supreme, Turbo, and SB10 General Purpose lines. With thick 10–12 mm segments, precision engineering, and laser-welded construction, these blades are ready for heavy-duty commercial and industrial use.

What Makes the ROC 10″ Diamond Blade Exceptional?

ROC Abrasives pulse-pound the market with pro-grade 10″ diamond blades designed to withstand intense workloads. Key specs include:

Segment Height: 10–12 mm (0.394–0.472″) for durability under heavy use
Segment Type: Turbo (continuous serrated rim), segmented, or combo designs—each tailored to core materials and job types.
Applications: Ideal for cutting asphalt, reinforced concrete, brick, block, pavers, stone, porcelain, and tile

With thicker segments than most consumer blades, ROC's 10″ lineup resists wear, stays precise, and holds its edge on tough cuts.

Key ROC 10″ Blades Overview

ROC Crusher Supreme 9″ & 10″ TSEG Supreme

Engineered for hard aggregates—like pavers, brick, and rough stone—this blade pairs turbo-segmented speed with high-segment height. It delivers fast, clean cuts and extended life on heavy-duty jobs .

SB10 General Purpose PRO SERIES (10″)

A versatile all-rounder with thick segments and keyhole slots. Cuts through concrete, brick, block, and asphalt with consistent results. A dependable go-to for rental fleets or mixed-material projects

Turbo & Segmented Vari Cuts (10″)

ROC’s turbo options balance speed and precision for both wet and dry cuts, while segmented models maximize debris clearing on long runs—perfect for walk-behind saws and angle grinders i

Performance Highlights for ROC 10″ Blades

1. Durable Thick Segments
With 10–12 mm segment heights, ROC blades cut deeper and resist premature wear—even when cutting hard stone or heavily reinforced concrete

2. Turbo and Segmented Advantages
Turbo blades offer fast and smooth cuts with less vibration, while segmented blades allow efficient dust and slurry clearance for extended use and cooler cutting

3. Strong Bond Matrix
ROC uses laser-welded, soft bond matrix materials optimized for long life across varied job materials—especially masonry, asphalt, and green concrete.

4. Wet or Dry Use
ROC 10″ blades are engineered for both wet and dry applications. Wet cutting enhances lifespan and reduces dust, while dry cutting boosts convenience where water is unavailable

Use Cases for the ROC 10″ Diamond Blade

Concrete & Masonry Cutting

Ideal for deep slab cuts, trenching, and precise concrete separations. Thick segments resist warping under heat and stress.

Asphalt Repair & Roadwork

Turbo and segmented blades cut quickly through asphalt, with slots designed to clear loose material and prevent clogging.

Hardscape & Paver Work

Fast, clean cuts in brick, pavers, concrete block, and stone—perfect for patios, walkways, retaining walls, and stairs.

Porcelain & Tile Slabs

Select ROC turbo continuous rim tile blades in 10″ to get chip-free, precision cuts in delicate materials.

Choosing the Best ROC 10″ Blade

When selecting your blade:

Material: Use SB10 for general-purpose; Crusher Supreme for hard surfaces; Turbo for clean fast cuts; Segmented for debris-heavy tasks.
Jobsite Conditions: Choose wet blades for maximum life in controlled environments; use dry blades for portability or no-water access.
Saw Compatibility: ROC offers arbor sizes suitable for walk-behind/concrete saws (1″/20 mm) and angle grinders (7/8″–5/8″). Confirm your tool’s arbor size.

Care Tips to Maximize Blade Life

Use Water Whenever Possible: Wet cutting extends blade life and cuts cleaner.
Match RPM & Application: Turbo blades need higher RPM but thinner cuts; use segmented blades at lower speeds for debris-heavy cuts.
Avoid Overheating: Let the blade cool during long cuts; prolonged contact can warp the steel core.
Storage & Inspection: Keep blades dry and protected. Remove if core cracks or segments loosen.

FAQ: ROC Abrasives 10″ Diamond Blade

Q: What materials can ROC 10″ blades cut?
A: Designed for concrete, brick, block, asphalt, stone, and tile—different models suit different materials.

Q: Are ROC 10″ blades compatible with handheld saws?
A: Yes—avail in 7/8″–5/8″ arbor for grinders and 1″/20 mm arbor for walk-behind and concrete saws .

Q: Wet or dry cutting—which is better?
A: Wet cutting increases life and minimizes dust. Dry cutting is fine for quick, on-the-go jobs but may reduce longevity.

Final Thoughts

For job sites that demand professional-grade, high-performance cutting, the ROC Abrasives 10″ Diamond Blade lineup delivers unbeatable results. Featuring thick, durable segments, versatile turbo and segmented options, and compatibility across saw types, ROC blades provide consistent power, long life, and clean cuts—whether you're cutting concrete, asphalt, brick, stone, or porcelain.

Equip yourself with ROC’s 10″ options—Crusher Supreme, SB10 Pro Series, Turbo, Segmented—and get ready to cut better, faster, and more reliably on every job.