Home of the FAMOUS SHOCKER BLADE & SAW DEAL!

iQ360/iQMS362/iQMS362i Brush (Set of 2)
iQ360/iQMS362/iQMS362i Brush (Set of 2)

iQ360/iQMS362/iQMS362i Brush (Set of 2)

SKU: 0360-90014-01
Regular price
$25.54
Sale price
$25.54
Unit price
per 
Shipping calculated at checkout.

 

iQ360/iQMS362/iQMS362i Brush (Set of 2)

Set of 2 replacement motor brushes for use in the iQ360 or the iQMS362.



Extend Your Saw’s Life with the iQ360/iQMS362/iQMS362i Brush (Set of 2)

When it comes to high-performance masonry cutting, saws like the iQ360, iQMS362, and iQMS362i from iQ Power Tools are among the industry’s best. These dry-cut saws are engineered for powerful performance, cleaner cuts, and integrated dust collection that sets them apart from the competition.

But to keep them running at peak efficiency, routine maintenance isn’t optional—it’s essential. That’s where the iQ360/iQMS362/iQMS362i Brush (Set of 2) comes in. Small yet critical, these carbon brushes help keep your saw’s motor working smoothly, prevent costly breakdowns, and extend the tool’s lifespan.

In this in-depth guide, we’ll explain why these brushes matter, how to tell when it’s time to replace them, and the benefits of choosing genuine iQ Power Tools parts. Plus, we’ll show why the iQ360/iQMS362/iQMS362i Brush (Set of 2) is a must-have item in your maintenance kit.


What Are Motor Brushes and Why Do They Matter?

Carbon brushes may be small, but they’re a powerhouse part of electric tools. In saws like the iQ360, iQMS362, and iQMS362i, brushes:

✅ Conduct electricity from the power source to the motor’s rotating parts (armature)
✅ Help generate the torque needed to power through brick, block, and pavers
✅ Keep the motor running efficiently and reduce heat buildup

Over time, these brushes wear down naturally because they’re made from carbon—a material chosen for its conductivity and durability. Replacing them with the iQ360/iQMS362/iQMS362i Brush (Set of 2) ensures your saw keeps cutting powerfully and safely.


Signs You Need to Replace Your Brushes

Don’t wait for your saw to stop working completely. Regular inspection can catch worn brushes early. Here are common signs it’s time to swap them:

  • Sparks near the motor during startup or cutting

  • Reduced cutting power or slower blade speed

  • Intermittent operation where the motor starts and stops randomly

  • Unusual noises or vibrations from the motor area

  • Visible wear: brushes shorter than about 1/4 inch (6 mm)

When you see these symptoms, installing a fresh iQ360/iQMS362/iQMS362i Brush (Set of 2) is the best way to restore performance.


Why Choose the Official iQ360/iQMS362/iQMS362i Brush (Set of 2)?

With so many aftermarket options, you might wonder why the genuine set is worth it. Here’s why:

Exact Fit – Specifically sized to fit the iQ360, iQMS362, and iQMS362i motors, avoiding installation headaches.
OEM Quality – Built to iQ Power Tools standards to deliver consistent electrical contact and longer life.
Protects Warranty – Using genuine parts keeps your tool’s warranty intact.
Better Performance – Maintains full motor torque, blade speed, and dust collection efficiency.

A small investment in genuine brushes keeps your premium saw running like new—saving money and downtime in the long run.


Compatible with iQ’s Top Dry-Cut Saws

The iQ360/iQMS362/iQMS362i Brush (Set of 2) isn’t a generic part. It’s designed to perfectly match the motors in:

iQ360 – Compact, portable dry-cut saw ideal for small block and brick jobs.
iQMS362 – Mid-size saw with powerful dust control and 16.5" blade capacity.
iQMS362i – The latest generation featuring enhanced engineering and even better dust capture.

With one part number covering multiple saws, it’s the smart choice for crews with more than one iQ saw in their fleet.


Step-by-Step: How to Replace Your Brushes

Replacing brushes is easier than many users expect. Here’s a basic guide (always refer to the official manual):

  1. Power down and unplug the saw.

  2. Locate the brush caps on the motor housing—usually two, one on each side.

  3. Remove the old brushes by unscrewing the caps and gently pulling them out.

  4. Inspect for wear – old brushes will be short, chipped, or unevenly worn.

  5. Insert the new brushes from your iQ360/iQMS362/iQMS362i Brush (Set of 2), aligning them correctly.

  6. Reattach the brush caps securely.

  7. Test the saw before putting it back into service.

Tip: Replace both brushes at the same time for balanced performance.


How Often Should You Replace Brushes?

There’s no single schedule—it depends on use. For daily contractors, check brushes every 6 months; for occasional use, an annual check may suffice.

High-dust environments, frequent cutting, or heavy materials can speed wear. That’s why keeping a spare iQ360/iQMS362/iQMS362i Brush (Set of 2) on hand is a smart move.


Benefits of Regular Brush Maintenance

Investing a few minutes and a small cost in brush replacement delivers big benefits:

Keeps motor running cool – Reduces risk of overheating.
Sustains blade speed – For clean, fast cuts on every project.
Extends motor life – Avoids armature damage and costly repairs.
Minimizes downtime – Prevents unexpected stoppages during critical work.
Maintains dust control – Motor power keeps the integrated vacuum working at top efficiency.


Where to Buy the iQ360/iQMS362/iQMS362i Brush (Set of 2)

To ensure quality and protect your tool:

Buy from authorized dealers or trusted suppliers like BladesDirect.net.
Avoid unbranded parts that claim to fit but may lack correct specifications.
Look for genuine packaging and part numbers directly from iQ Power Tools.

Buying genuine keeps your saw running as engineered—and your team productive.


Tips to Maximize Brush Life

Besides replacement, these simple habits help brushes last longer:

  • Keep your saw clean – Dust buildup can wear brushes faster.

  • Avoid overloading the motor – Let the saw do the work.

  • Use proper blades – Sharp blades reduce strain on the motor.

  • Follow recommended maintenance – Combine brush replacement with the annual tune-up kit.

Together, these steps ensure you get the best return on your saw investment.


Why the iQ360/iQMS362/iQMS362i Brush (Set of 2) Belongs in Your Toolbox

Every professional knows: small parts keep big tools running. By adding the iQ360/iQMS362/iQMS362i Brush (Set of 2) to your maintenance plan, you:

✅ Keep your saw cutting powerfully.
✅ Avoid expensive downtime.
✅ Extend the motor’s life.
✅ Maintain the saw’s dust control system.

A small, affordable part delivers peace of mind and big savings over time.


Conclusion: Protect Your Saw, Protect Your Business

Your iQ360, iQMS362, or iQMS362i saw represents a serious investment in quality and safety. Maintaining it with genuine parts like the iQ360/iQMS362/iQMS362i Brush (Set of 2) is the simplest way to protect that investment.

Don’t wait until your motor shows signs of trouble—order your replacement brushes today from an authorized dealer and keep every cut sharp, smooth, and dust-free.