Imer Combicut 250VA Rail Wet Saw

The Imer Combi 250VA electric tile cutter is lightweight and can plunge cut. The extruded aluminum travel bar design provides a smooth, accurate cut. Maintenance is minimal—just spray wipe with DW-40, and you're good to go.

Features

• 1.75 hp motor, 110V, blade speed 2800 Rpm. This saw has a hi-torque at low Rpm to deliver fast, chip-free, cutting performance
• Maximum cutting depth 2-1/2", 1-1/4" with 90/45 degrees cuts
• 45-degree miter cuts: tilt the cutting head
• Adjustable cutting head makes plunge cuts, and L cuts a snap
• The stand and side table are very light yet stable and strong
• Cast aluminum makes for a rigid and lightweight saw at 72 lbs, and the all-new cast aluminum protractor is genuinely an accurate rip guide

What's Included?

• Imer Combi 250 VA Wet Tile Saw
• Tile Saw Stand
• Side Table Extension
• 10 in Diamond Blade (installed)
• Water Pump in Pan
• Rip Guide
• Protractor Guide
• Spare Parts
• Wrenches
• Operator's manual

Imer's Message

"Today's tile and stone pieces are larger and more expensive than in years past. Consequently, architects and their clients want the pieces set very close together for that striking "slab look." This requires accurate, chip-free cutting performance. The Combi 250VA delivers this performance for the most demanding installations daily. GUARANTEED!" - Mace T. Coleman Jr

The Imer Combicut 250VA Rail Wet Saw is a professional‑grade overhead rail tile and stone saw designed for precise, chip‑free cutting of ceramic tile, porcelain, marble, granite, and stone on the jobsite or in the workshop. With a powerful 1.75 HP direct‑drive motor, 10" blade capacity, and smooth sliding rail system, the Imer Combicut 250VA Wet Saw delivers long, accurate cuts while staying portable and easy to set up.

Overview of the Imer Combicut 250VA Rail Wet Saw

The Imer Combicut 250VA Rail Wet Saw (often called the Combi 250VA) is IMER’s most popular 10" overhead rail wet tile saw. It uses a bridge/rail design with a moving motor head that glides over a fixed table, allowing straight, diagonal, plunge, and miter cuts with excellent accuracy and control. This water‑cooled bridge saw is ideal for cutting ceramic tiles, porcelain panels, stone materials, bricks, and similar products that require clean, straight edges and minimal chipping.

Thanks to its cast aluminum construction and compact design, the Combicut 250VA offers a strong combination of rigidity, accuracy, and portability. It’s widely used by tile setters, stone fabricators, remodelers, and contractors who need job‑site performance close to what is usually only possible with larger shop saws.

Motor, Power, and Blade Capacity

At the heart of the Imer Combicut 250VA Rail Wet Saw is a high‑torque, direct‑drive electric motor engineered specifically for this machine.

Key motor and blade specs include:

• Motor rating: 1.75 HP, 110V, 15‑amp, single‑phase.

• Blade capacity: 10" diamond blade.

• Arbor size: 5/8" blade shaft.

• Blade speed: approximately 2,800 rpm for fast, chip‑free cutting.

The 1.75 HP motor is specifically tuned to deliver high torque at relatively low blade speed, which helps the saw cut dense porcelain and stone with less chipping and smoother edges. This direct‑drive setup eliminates belts, reduces maintenance, and ensures consistent power transfer to the blade.

Cutting Capacity, Depth, and Angles

The Imer Combicut 250VA Rail Wet Saw is built to handle modern large‑format tile while still remaining compact enough for easy transport.

Typical cutting capacities:

• Maximum straight cutting length at 90°: 28".

• Maximum cutting length with plunge cut: 31".

• Maximum depth of cut: up to 3‑3/4" in some spec sheets and 2‑1/2" in others, depending on configuration and material; many distributors list 3‑3/4" maximum depth for the 10" blade version.

• Diagonal cut capacity: up to about 22" on a square tile.

The saw head tilts to allow miter cuts between 90° and 45°, so you can make beveled edge cuts while maintaining consistent depth. The overhead rail design also supports precise plunge cuts and L‑cuts by lowering the blade into the material, which is particularly useful for outlets, vents, and corners.

Rail / Bridge Design and Construction

The defining feature of the Imer Combicut 250VA is its overhead rail (bridge) design. Instead of sliding the tile through a fixed blade, the saw uses a moving motor head that rides on precision rails above the table, giving you:

• Smooth, controlled motion along the cut line via sealed bushings for accurate, low‑vibration travel.

• Better visibility of the cut thanks to the elevated head and integrated water delivery system.

• Greater accuracy on long cuts, since the tile can stay stationary or move slightly while the head travels on the rail.

The chassis and cutting head use aircraft‑quality cast aluminum, which keeps the saw lightweight while maintaining rigidity and resisting corrosion. This makes the saw both durable and easy to clean; many users simply spray the surfaces with a light penetrating oil and wipe clean.

Water Cooling System and Wet Cutting

As a wet rail saw, the Imer Combicut 250VA is equipped with a recirculating water system that cools the blade and controls dust.

Key water system features:

• High‑impact poly water pan with around 10‑gallon capacity for the 10" version.

• Submersible high‑flow water pump rated around 3 gpm to deliver ample water to the blade.

• Adjustable precision water valve above the blade to control water flow and minimize overspray.

This water‑cooling setup extends blade life, improves cut quality, and significantly reduces airborne silica dust—important for safety and compliance on modern job sites.

Laser Guide, Accessories, and Included Components

Recent versions of the Combicut 250VA include features and accessories aimed at enhancing accuracy and usability.

Commonly included items:

• Integrated laser guide to project the cutting line for faster alignment and more precise cuts.

• Sturdy folding stand with rubber feet to prevent slipping and protect finished floors.

• Side extension table to support larger tiles and stone slabs during cutting.

• 10" continuous‑rim porcelain diamond blade installed from the factory.

• Rip guide and 180° adjustable protractor guide for repeatable straight and angle cuts.

• Water pump, hoses, spare parts kit, wrenches, and an operator’s manual.

These components help you use the saw to its full potential immediately, without needing extensive aftermarket accessories.

Dimensions, Weight, and Portability

Despite its professional capacity, the Imer Combicut 250VA Rail Wet Saw is designed to be portable.

Typical physical specs:

• Saw weight (without stand): about 72 lbs.

• Weight with stand / boxed: around 85 lbs.

• Approximate dimensions (L x W x H): about 40" x 18–22" x 22".

The integrated stand on many models can fold and flip up with a wheel kit for easier transport, so one or two people can load the saw into a van or truck. This makes the Combicut 250VA a strong fit for installers who move from job to job but still need highly accurate, rail‑style cutting.

Ideal Materials and Applications

The Imer Combicut 250VA Rail Wet Saw is designed to handle a wide range of tile and stone materials.

Common materials:

• Ceramic and porcelain tile.

• Natural stone such as marble, granite, limestone, and travertine.

• Engineered stone and some masonry products (within the saw’s depth and length limits).

Typical applications:

• Cutting large‑format floor tile and wall tile.

• Precision trimming of stone slabs and steps within length capacity.

• Mitering edges for outside corners and clean transitions.

• Plunge and L‑cuts for outlets, plumbing penetrations, and floor registers.

Lightweight yet rigid construction allows it to produce shop‑quality cuts in a mobile format, making it especially popular with tile contractors and remodelers.

Key Advantages of the Imer Combicut 250VA Rail Wet Saw

Several features set the Combicut 250VA apart from many other jobsite tile saws.

Major benefits:

• Precision and cut quality: The overhead rail design, sealed bushings, and laser guide support straight, chip‑free cuts even on long tiles.

• Power and torque: The 1.75 HP motor provides strong, consistent cutting power through dense porcelain and stone.

• Portability: Cast aluminum construction and a folding stand keep weight reasonable while maintaining rigidity.

• Complete package: Blade, stand, side table, guides, pump, and accessories are often included, so the saw is ready for professional use out of the box.

• Easy maintenance: Smooth finishes and aluminum components make the saw easy to clean and maintain for long‑term use.

These advantages make the Imer Combicut 250VA Rail Wet Saw a strong choice for professionals who want one primary wet saw that can handle most tile and stone cutting tasks with accuracy and reliability.

Who Should Choose the Combicut 250VA?

The Imer Combicut 250VA Rail Wet Saw is best suited for:

• Professional tile installers who regularly work with large‑format tile and porcelain.

• Stone and tile shops needing a portable bridge saw for jobsite work.

• Remodelers and contractors who demand precise, chip‑free results on high‑end finishes.

Because it offers a balance of power, cutting capacity, and portability, it fits well for both residential and light commercial projects where clean edges and accuracy matter.