BMG780RC is a remote-controlled floor grinder designed for finishing large horizontal surfaces.
This machine is equipped as standard with a speed control system. BMG780RC is operated using a remote control that gives you all relevant information such as Amps, Volt, rpm, etc. In addition, it is battery driven, allowing the operator to go in and out of sites, thanks to a 24V battery drive system and two independent drive motors. In addition, the foot pedal helps you to lift back the machine and then change the tools. It is an ideal machine for polishing and maintaining floors as well thanks to its adjustable grinding pressure.
FEATURES
Discover all features and learn more about the benefits
BATTERY DRIVEN
This machine is battery driven, enabling the operator to go in and out of sites, thanks to a 24V battery drive system and two independent drive motors.
INCREASED PRODUCTIVITY WITH REMOTE CONTROL
This triple disc grinder is operated with a remote control where all relevant information (Amps, Volt, rpm, etc) are displayed. You can drive, change the working speed, turn on/off the machine using the remote.
EFFICIENT DUST MANAGEMENT
This grinder is equipped as standard with a local dust exhaust of 3 in diameter, a floating shroud and an extra nozzle for minimized dust exposure on the job site.
TIME SAVING TOOL CHANGE
This floor grinder is standard delivered with the 240 mm diameter Slidemag adapter plates. These allow the Slidemag wings to be easily slid in and out.
⚠️ CALIFORNIA PROPOSITION 65 WARNING
WARNING: This product and/or its use may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Cutting, grinding, drilling, or otherwise disturbing concrete, masonry, brick, stone, and similar materials may generate airborne dust containing respirable crystalline silica, which is known to the State of California to cause cancer.
Always follow the equipment manufacturer's safety instructions and use appropriate dust-control methods and personal protective equipment when cutting.
