DPU90r Lec770 Reversible Vibratory Plate
5100028359
Categories
Compaction , Vibratory Plates ,Reversible Vibratory Plates ,
Product Details
Heavy remote-controlled vibratory plate with outstanding properties in terms of maneuverability, operating
comfort, sturdiness and transport. Ideal for working in trench applications and sheeting and bracings.
Vibratory plate with unique steering behavior: Very easy to steer due to the remote control with two joysticks. Travel
speed and rotation possible simultaneously, allowing for accurate turning of curves and a fast working speed
Large infrared receiver eye, well-protected from damage: Gives when impacted or folds in
Time-tested and proven safety features of infrared receiver eye technology: Proximity (nearness) recognition sensor
protects the operator, machine standstill if the clear line of sight is interrupted
Remote control in the unit can be charged under lockable hood
Low overall height for compact working and transport dimensions
Sturdy, two-piece steel frame hood, lockable
Fold-down lifting eye, optimally shaped for using various tackle
Start at the push of a button, automatic start after the warm-up phase prevents a cold start that stresses the
machine
Operator's panel, 12 languages available: Electronic operating displays, diagnostic menu, including for battery
voltage, engine speed, coolant temperature, error memory
Machine protection sensor protects the machine from overload when driving on hard sub-surface. Programmable
behavior: Warning flashing, RPM reduction or shutdown of the machine
Programmable anti-theft PIN
Hood can be opened without tools by swinging open, offers quick and spacious access to all control and maintenance parts
Large air filter for long service life
Large tank, fill level can be seen from outside
Quiet liquid-cooled engine
Four large tie-downs on the base plate, very easily accessible, even from outside of the loading area
Optionally also available with Compatec (compaction control).
Four large tie-downs on the base plate, very easily accessible, even from outside of the loading area
Optionally also available with Compatec (compaction control).
ELECTRICAL SYSTEM-1
- Remote Control Bat. Capacity : 8 h
- Recommended Battery Typ : Ni-MH 7,2V/2000mAh
- Remote Control Range : 20 m
- Charging Time : 2,00 h
ELECTRICAL SYSTEM-2
- Remote Control Bat. Capacity : 8 h
- Recommended Battery Typ : Ni-MH 7,2V/2000mAh
- Remote Control Range : 65,6 Foot
- Charging Time : 2,00 h
ENVIRONMENT DATA-1
- Storage temperature range : -20 - 50 C
- Sound level LpA : 83,0 dB(A)
- Sound level LpA (Standard) : EN 500-4
- Operating temperature range : -10 - 50 C
- Sound power LWA, measured : 108,0 dB(A)
- Sound power LWA, guaranteed : 109,0 dB(A)
- Sound power LWA (Standard) : EN 500-4, 2000/14/EG
ENVIRONMENT DATA-2
- Storage temperature range : -4 - 122 F
- Sound level LpA : 83,0 dB(A)
- Sound level LpA (Standard) : EN 500-4
- Operating temperature range : 14 - 122 F
- Sound power LWA, measured : 108,0 dB(A)
- Sound power LWA, guaranteed : 109,0 dB(A)
- Sound power LWA (Standard) : EN 500-4, 2000/14/EG
MECHANICAL - OUTPUT DETAILS-1
- Vibrations : 3.780 1/min
- Vibrations (Hz) : 63 Hz
- Centrifugal force : 90,000 kN
- Area capacity : 1.294 m2/h
- Forward Running : 28,00 m/min
- Gradeability : 34,0 %
- Transmission : ELHY
MECHANICAL - OUTPUT DETAILS-2
- Vibrations : 3.780 1/min
- Vibrations (Hz) : 63 Hz
- Centrifugal force : 20.233 lbf
- Area capacity : 13.928,6 ft2/h
- Forward Running : 1,5 fps
- Gradeability : 34,0 %
- Transmission : ELHY
Engine-1
- Cooling : water-cooling
- Engine type : Diesel engine
- Engine operating mode : four-stroke
- Fuel : Diesel EN 590
- Cylinder : 2
- Cylinder capacity : 686 cm3
- Tank capacity : 7,20 l
- Oil filling max. : 1,60 l
- Power rating max. : 11,7 KW
- Engine speed (Power max.) : 3.600 1/min
- Standard (Operating power) : ISO 3046 IFN
- Operating Engine speed : 3.350 1/min
- Engine Manufacturer : Kohler
- Nominal Engine speed : 3.350 1/min
- Effective power : 10,7 KW
- Oil specification : SAE 10W-40
- Standard (Effective power) : ISO 3046 IFN
- Standard (Power max.) : ISO 3046 IFN
- Operating power : 9,8 KW
- Oil filling min. : 1,60 l
- Upper idling speed ex load : 3.450 1/min
- Exhaust-gas limit : US:EPA4 final+Diretive97/68/EG
- Starter battery Voltage : 12 V
- Starter type : E-starter
- Oil volume incl. filter change : 1,60 l
- Air cleaner : dry air filter
- Battery capacity (nom. value) : 50 Ah
- Inclined position max. : 25,0
- Fuel consumption : 2,70 L/hr
Engine-2
- Engine type : Diesel engine
- Fuel consumption : 0,7 GPH US
- Engine operating mode : four-stroke
- Fuel : Diesel EN 590
- Cylinder : 2
- Cylinder capacity : 41,9 Inch3
- Tank capacity : 1,9 gal US
- Oil filling max. : 0,4 gal US
- Power rating max. : 15,7 hp
- Engine speed (Power max.) : 3.600 1/min
- Standard (Operating power) : ISO 3046 IFN
- Operating Engine speed : 3.350 1/min
- Engine Manufacturer : Kohler
- Nominal Engine speed : 3.350 1/min
- Effective power : 14,3 hp
- Cooling : water-cooling
- Inclined position max. : 25,0
- Oil specification : SAE 10W-40
- Standard (Effective power) : ISO 3046 IFN
- Upper idling speed ex load : 3.450 1/min
- Starter battery Voltage : 12 V
- Starter type : E-starter
- Exhaust-gas limit : US:EPA4 final+Diretive97/68/EG
- Oil volume incl. filter change : 0,4 gal US
- Air cleaner : dry air filter
- Battery capacity (nom. value) : 50 Ah
- Standard (Power max.) : ISO 3046 IFN
- Operating power : 13,1 hp
- Oil filling min. : 0,4 gal US
MECHANICAL DETAILS-1
- Width : 770 mm
- Height : 833 mm
- Operating weight : 724,0 kg
- Length Drawbar in op. pos. : 1.207 mm
- Ground clearance : 830 mm
MECHANICAL DETAILS-2
- Width : 30,3 "
- Height : 32,8 "
- Operating weight : 1.596,1 lb
- Length Drawbar in op. pos. : 47,5 "
- Ground clearance : 32,7 "
OPERATING FLUIDS-1
- Tank capacity : 7,20 l
- Exciter oil volume : 1,60
- Hydraulic fluid type : Renolin MR 520
- Exciter oil type : 75W-90 API GL-4
- Cooling fluid volume : 3,30 l
- Cooling fluid type : SAE J1034:Wasser (1:1)
- Hydraulic fluid volume : 17,7 l
OPERATING FLUIDS-2
- Tank capacity : 1,9 gal US
- Cooling fluid type : SAE J1034:Wasser (1:1)
- Hydraulic fluid type : Renolin MR 520
- Exciter oil volume : 1,69 qt US
- Exciter oil type : 75W-90 API GL-4
- Cooling fluid volume : 3,5 qt US
- Hydraulic fluid volume : 18,7 qt US
HYDRAULIC-1
- Operating pressure hydraulics : 148,0 bar
- max. perm. hydraulic pressure : 230,0 bar
HYDRAULIC-2
- Operating pressure hydraulics : 2.146,0 psi
- max. perm. hydraulic pressure : 3.335,0 ps
Comes With
- Vibratory plate
- Remote control
- Operator's manual
- Machine configuration instructions