Home of the FAMOUS SHOCKER BLADE & SAW DEAL!
855-225-2337
Imer Koine 4 Hi FLOW Modular 11CFM 220v 3 Phase Air Compressor

Imer Koine 4 Hi FLOW Modular 11CFM 220v 3 Phase Air Compressor

SKU: 3224528
$2,600.32
$2,600.32
Shipping calculated at checkout.

IMER Koine 4 Hi FLOW Modular 11CFM 220v, 3 Phase Air Compressor

Features

  • Optional 11CFM, 220V, 3 Phase powered Modular air compressor
  • Turn your IMER Koine 4 High Flow into a spray pump
  • Just plug in the power and connect the air hose and you've instantly converted your grout pump into a spray pump
  • Add hoses and gun kits to suit your application

Imer Koine 4 Hi FLOW Modular 11CFM 220v 3 Phase Air Compressor is an optional, factory‑matched compressor module that mounts to the IMER Koine 4 High Flow continuous mixer‑pump to turn it into a full mortar, plaster, and fireproofing spray pump. Delivering approximately 11 CFM of compressed air at 220V, 3‑phase, this modular air compressor supplies the air volume needed at the gun for spraying stucco, plasters, fireproofing, and similar premixed materials, while the Koine 4 handles continuous mixing and pumping.

What the Koine 4 Hi FLOW Modular 11CFM 220V 3 Phase Air Compressor Is

The Imer Koine 4 Hi FLOW Modular 11CFM 220v 3 Phase Air Compressor is a bolt‑on accessory specifically designed for the Koine 4 Hi‑Flow continuous mixer and pump. Retailers describe it as an “optional 11CFM, 220V, 3 Phase powered modular air compressor” whose purpose is to “turn your IMER Koine 4 High Flow into a spray pump—just plug in the power and connect.”

Instead of using a separate, stand‑alone jobsite compressor, this modular unit integrates with the Koine 4’s frame and electrical system, creating a compact, self‑contained spraying system for premixed mortars and plasters.

Key Features and Specifications

While IMER does not publish a separate full spec sheet for the compressor alone, multiple sources and the Koine 4 documentation provide the main details:

  • Type: Modular, frame‑mounted air compressor for Koine 4 Hi Flow

  • Air delivery: 11 CFM (approx.) continuous air output

  • Power supply: 220V / 60 Hz, 3‑phase (same as the Koine 4 Hi Flow mixer‑pump)

  • Intended machine: IMER Koine 4 Hi‑Flow continuous mixer‑pump (model 1106004 class)

  • Function: Supplies compressed air to mortar/plaster/fireproofing spray guns connected to the Koine 4; integrated as part of the pump’s system rather than as a separate compressor.

The Koine 4 pump catalog and third‑party listings show that the standard Koine 4 Hi Flow includes an “electric compressor 1 HP – 9 CFM V‑stroke (optional)” and that a 220V, 3‑phase dual‑diaphragm compressor, part #1107680, is the dedicated compressor option for Koine 4. The Imer Koine 4 Hi FLOW Modular 11CFM 220v 3 Phase Air Compressor is the higher‑output modular version marketed to match the high‑flow capabilities of the Koine 4 Hi‑Flow.

How It Integrates with the Koine 4 Hi Flow

The Koine 4 Hi‑Flow is a high‑volume continuous mixer‑pump designed to mix and pump large volumes of pre‑blended materials such as self‑leveling underlayments, grouts, and wall materials. Its core specs include:

  • Power supply: 220V, 3‑phase

  • Total machine power: 9 HP

  • Mixing/pumping motor: 7.5 HP

  • Feeding impeller motor: 1 HP

  • Material flow rate: up to 140–169 cu ft/hour (5–7 bags per minute)

  • Max pumping distance: 200–300+ ft depending on material and hose size

On its own, Koine 4 is primarily a mixing and pumping machine. To spray mortars, stuccos, and fireproofing materials, compressed air is needed at the spray gun to atomize and project the material.

The Imer Koine 4 Hi FLOW Modular 11CFM 220v 3 Phase Air Compressor bolts onto the Koine 4’s frame and connects to:

  • The Koine 4’s electrical panel, sharing the same 220V 3‑phase feed and controls.

  • The Koine 4’s internal air plumbing and service pressure gauge (noted in Koine 4 Evo documentation), providing a regulated air supply for spray guns.

  • Air quick‑connect outlets that feed Imer spray guns and wands used with mortar, stucco, and fireproofing kits.

Once installed, the operator simply connects the spray gun’s air hose to the compressor outlet and the material hose to the Koine 4, then uses the Koine 4’s controls to manage both pumping and air delivery as a unified system.

Turning the Koine 4 Hi Flow into a Spray Pump

The main value of the Koine 4 Hi FLOW Modular 11CFM 220v 3 Phase Air Compressor is that it “turns your IMER Koine 4 High Flow into a spray pump.”

In practice, that means:

  • The Koine 4 continues to mix and pump premixed materials (e.g., stucco, plaster, fireproofing, light mortars).

  • The modular 11 CFM compressor supplies constant air to spray guns like the IMER mortar, stucco, and fireproofing gun kit (Part #1107005).

  • The combination allows you to spray materials directly onto walls and ceilings rather than only pumping into forms or onto floors.

This integrated approach is more compact and efficient than using a separate large compressor, especially on tight jobsites and interior projects where equipment footprint and power availability matter.

Why 11 CFM and 220V 3 Phase Matter

Spray guns used for mortar, stucco, and fireproofing typically require a substantial volume of air—often in the 7–12 CFM range or higher at working pressure—to maintain a good spray pattern and avoid pulsation.

By providing about 11 CFM at 220V 3‑phase, the Koine 4 Hi FLOW Modular air compressor:

  • Matches the high production rate of the Koine 4 Hi‑Flow (up to 169 cu ft/h), making sure the gun has enough air to keep up with the material flow.

  • Runs from the same 220V 3‑phase supply as the Koine 4, simplifying power distribution and minimizing separate circuits.

  • Avoids undersized air supplies that can cause poor spray patterns, clogs, or uneven finishes.

For contractors, this means better, more consistent spray quality and fewer equipment coordination issues.

Typical Applications with Koine 4 Hi Flow + Modular Compressor

With the Imer Koine 4 Hi FLOW Modular 11CFM 220v 3 Phase Air Compressor installed, the Koine 4 Hi‑Flow can be used not just for pumping but for high‑production spray applications:

  • Spray‑applied stucco and traditional plasters on large wall surfaces.

  • Spraying fireproofing mortars on structural steel and concrete substrates.

  • Applying spray‑on insulation plasters or lightweight materials when configured with the appropriate Koine 4 rotor/stator and mixer kit.

  • Spraying repair mortars and structural plasters in tunnels, parking garages, and industrial facilities.

Because the Koine 4 Hi‑Flow already handles very high material volumes (5–7 bags per minute, 140–169 cu ft/hr), adding the 11 CFM compressor creates a powerful, integrated system for large‑scale spray jobs where productivity is critical.

OEM Integration and Modular Design

The Imer Koine 4 Hi FLOW Modular 11CFM 220v 3 Phase Air Compressor is designed as a factory‑style module, not an improvised add‑on.

Key integration advantages:

  • Mounts on dedicated brackets or subassemblies identified as “Compressor A / Compressor B” in Koine 4 parts diagrams.

  • Interfaces directly with the Koine 4’s electrical panel, which already contains a compressed air system and service pressure gauge for monitoring.

  • Maintains proper balance and center of gravity of the Koine 4, preserving stability and mobility.

  • Simplifies service and parts sourcing, as it uses IMER‑specified components and part numbers.

This modular design means installers and service technicians do not have to engineer their own compressor integration; they can rely on a complete IMER solution.

Benefits of the Imer Koine 4 Hi FLOW Modular 11CFM 220V 3 Phase Air Compressor

Contractors and rental fleets gain several key benefits from using this modular compressor with their Koine 4 Hi‑Flow:

  1. Single, integrated spray system

    • One machine handles mixing, pumping, and air supply, reducing setup time, hoses, cables, and coordination between separate units.

  2. Matched performance

    • 11 CFM at 220V 3‑phase is sized to support the Koine 4 Hi‑Flow’s high material output, enhancing spray consistency and productivity.

  3. Simplified power management

    • Both pump and compressor run on the same 220V 3‑phase service, avoiding the need for additional single‑phase circuits or separate compressor power.

  4. Compact footprint

    • Modular mounting keeps the overall system compact and maneuverable compared to towing or positioning a second large compressor nearby.

  5. Improved jobsite efficiency

    • Less equipment to move, fuel, service, and coordinate means crews can focus on application rather than equipment logistics.

Why Choose the Imer Koine 4 Hi FLOW Modular 11CFM 220V 3 Phase Air Compressor?

If you own or plan to use an IMER Koine 4 Hi‑Flow continuous mixer‑pump and want to spray mortars, stucco, plasters, or fireproofing at high production rates, the Imer Koine 4 Hi FLOW Modular 11CFM 220v 3 Phase Air Compressor is the accessory that completes your system. As an optional 11CFM, 220V, 3‑phase modular compressor, it is specifically engineered to mount on the Koine 4 Hi‑Flow, plug into its power and controls, and provide reliable air supply for professional spray guns.

By turning the Koine 4 Hi‑Flow into a true spray pump rather than just a mixer‑pump, this modular compressor expands what your equipment can do—allowing you to tackle large spray‑applied projects with a single, integrated, high‑output IMER system.