Core Cut CC1800XL Self-Propelled Concrete Saws
NOTE: BLADE ON SAWS IN PICTURE ARE NOT INCLUDED : BLADES MUST BE PURCHASED SEPERATELY
Features
- Solid, sealed self aligning blade shaft ball bearings
- Left or right hand sawing
- Fuel capacity 2 gallons
- Screw feed raise and lower system
- Blade drive is via 4 belts on models 16 hp and up. 14 hp or below have 3 belts
- Hydraulic model input flow 25 GPM 2500 PSI maximum
- Electric models includes motor starter switch box with amp meter
- 20 hp Honda model features electric start
- 33 Amp 7.5 hp 220V 1 phase Motor
- CC1800 Control Panel (remote throttle, choke and ignition switch are only available on 20 hp models)
What's Included?
- Core Cut CC1800XL Self-Propelled Concrete Saw
- Tach/Hour Meter (18-23 HP Models)
- Electric Start (18-23 HP Models)
- Low Oil Alert
- Operator's manual
| Core Cut CC1800-XL Blade Specifications | |||
| Blade Size | 14 inch | 20 inch | |
| Depth of Cut | 4-5/8 inch | 7-5/8 inch | |
| Arbor | 1 inch | 1 inch | |
| Core Cut CC1800-XL Self-Propelled Motor Specifications | |||||
| Motor Type | Honda GX390 | Briggs Vanguard |
Danfoss Hydraulic (15 gpm) |
Honda GX630 | Baldor (Single Phase) |
| Power Source | Gas | Gas | Hydro | Gas | Electric - 230V |
| Power | 11.7 hp | 16 hp | 18 hp | 20.8 | 7.5 hp |
| Blade Capacity | 14 in, 20 in | 14 in, 20 in | 14 in, 20 in | 14 in, 20 in | 14 in, 20 in |
| Product Weight in lbs. (Based on Blade Capacity) |
380 | 380 | 470 | 445 | 445 |