IMER - CC-X SERIES BLADES - Segmented Premium Masonry Blades

SIZES: 10” | 14” | 20”

The Imer CC-X Segmented Premium Masonry Blades are designed specifically for abrasive masonry applications such as Block, Brick, Sandstone, and Soft Stone.

IMER – CC-X SERIES BLADES – Segmented Premium Masonry Blades are professional‑grade diamond blades engineered specifically for abrasive masonry applications such as block, brick, sandstone, and soft stone. Designed to deliver fast cutting and long life in tough materials, these segmented rim blades are available in 10", 14", and 20" diameters and fit most masonry and block saws with a 1" arbor.

Overview of IMER CC-X SERIES BLADES – Segmented Premium Masonry Blades

IMER CC-X SERIES BLADES are part of IMER’s premium segmented masonry blade lineup and are described as “segmented premium masonry blades designed specifically for abrasive masonry applications such as block, brick, sandstone, and soft stone.” Unlike general‑purpose diamond blades, CC-X blades are tuned for highly abrasive, relatively softer masonry materials where blade wear can be rapid if the bond is not engineered correctly.

These blades feature a segmented rim design to efficiently clear debris and cool the blade, making them ideal for high‑duty cutting on IMER masonry saws such as the Masonry 350 Smart Cut, Masonry 750 Plus, and other compatible block saws used on construction sites and in fabrication yards.

Sizes, Specifications, and Construction

According to IMER USA and distributor specifications, the IMER – CC-X SERIES BLADES – Segmented Premium Masonry Blades come in three primary diameters:

CC-X Segmented Premium Masonry Blade Specs:

• 10" CC-X blade – Part #1193932

  • Diameter: 10"

  • Arbor: 1"

  • Thickness: 0.110"

• 14" CC-X blade – Part #1193934

  • Diameter: 14"

  • Arbor: 1"

  • Thickness: 0.125"

• 20" CC-X blade – Part #1193938

  • Diameter: 20"

  • Arbor: 1"

  • Thickness: 0.155"

  • Note: IMER specifies that a conversion kit is required when using 20" blades on some saw models.

General characteristics from the CC-X spec listing:

• Blade type: Segmented rim premium masonry blade.

• Arbor size: 1".

• Thickness range: 0.110" – 0.155".

• Wet or dry: Rated for both wet and dry cutting.

• Dimensions: Ranging from 10" × 10" × 0.110" up to 20" × 20" × 0.155".

• Weight: Approximately 2.7 lb (10" blade) up to ~9.41 lb (20" blade).

These dimensions make CC-X blades compatible with most professional masonry saws and block saws configured for 1" arbors, including IMER’s own saw lineup.

Designed Specifically for Abrasive Masonry Materials

The CC-X SERIES BLADES are described by IMER as “premium segmented blades designed specifically for abrasive masonry applications such as block, brick, sandstone, and soft stone.”

According to Master Wholesale’s performance chart:

• Best suited for:

  • Concrete block (CMU).

  • Clay brick and structural brick.

  • Sandstone and soft stone.

  • General abrasive masonry units.

• Performance on tile and non‑masonry:

  • Ceramic tile: Poor.

  • Porcelain tile: Poor.

  • Glass tile: Poor.

  • Marble: Fair.

This clearly indicates that IMER – CC-X SERIES BLADES – Segmented Premium Masonry Blades are optimized for abrasive, relatively softer construction materials rather than hard porcelain, glass, or cosmetic tiles where continuous rim blades are preferred.

For those harder or more brittle materials, IMER recommends their TGM‑X continuous rim tile blades or LTS‑X concrete turbo blades instead.

Segmented Rim Design for Cooling and Debris Removal

Segmented rim blades like the CC-X SERIES BLADES use individually separated segments around the rim of the blade with gaps (gullets) between them.

Benefits of the segmented rim design include:

• Enhanced cooling: The gullets allow water and air to flow freely around the segments, keeping the blade cooler during long cuts in abrasive materials.

• Efficient debris removal: The open spaces between segments help evacuate slurry and dust, reducing loading and maintaining cutting speed.

• Aggressive cutting profile: Segmented blades tend to cut faster than continuous rim blades, particularly in block, brick, and other thicker masonry materials.

Because abrasive masonry tends to generate a lot of dust and wear, this segmented design is ideal for maintaining both speed and blade life under demanding conditions.

Wet or Dry Cutting and Compatible Saws

IMER specifies that the CC-X SERIES BLADES – Segmented Premium Masonry Blades are suitable for both wet and dry cutting.

• Wet cutting is recommended whenever possible, especially for extended life and better dust control. Wet use is common on masonry saws with integrated water pans and pumps.

• Dry cutting is possible, particularly for short cuts or where water cannot be used, but operators should follow all safety guidelines and allow the blade to cool periodically to avoid overheating.

Compatible saws and applications:

• IMER Masonry Saws such as:

  • Masonry 350 Smart Cut (14" capacity).

  • Masonry 750 Plus (20" and 30" capacities, with conversion kits for larger blades).

• Other professional masonry and block saws with 1" arbor and 10", 14", or 20" blade capacity.

• Some rail saws and table saws configured for masonry blades (check maximum blade size and guard capacity).

When stepping up to 20" blades, IMER notes that a conversion kit is required on certain saws to ensure safe guard coverage and proper cutting geometry.

CC-X vs. Other IMER Blade Series

IMER’s saw blade catalog includes several series, and CC‑X fits into the “Segmented Premium Masonry Blades” category. Here’s how it compares to other IMER blade families:

• CC-X Series – Segmented Premium Masonry Blades

  • Sizes: 10", 14", 20".

  • Optimized for abrasive masonry like block, brick, sandstone, soft stone.

  • Segmented rim design, premium bond for longer life in softer, abrasive materials.

• LTS-X Series – Concrete Turbo Blades

  • Sizes: 10", 14", 20".

  • “Hard masonry turbo blades” for concrete, block, hard brick, natural stone, refractory, artificial stone, and a very wide material list.

  • Segmented turbo rim with teardrop gullets on some sizes.

• TGM-X Series – Continuous Rim Tile Blades

  • Sizes: 8", 10", 14".

  • Continuous rim blades for ceramic, porcelain, and stone tile where chip‑free appearance is important.

• SB707 Stone/Hard Application Premium Blades

  • Sizes: 14", 20", 30".

  • Silent core and stone‑optimized bonds for hard stone cutting.

• 30" Premium Masonry/Block & Stone Blades

  • 30" blades specifically designed for large block and stone on saws like Masonry 750 Plus.

Within this lineup, IMER – CC-X SERIES BLADES – Segmented Premium Masonry Blades are the go‑to choice when your primary work is abrasive masonry such as CMU, brick, sandstone, and soft stone, and you want maximum value and blade life from a segmented rim masonry blade.

Typical Use Cases and Ideal Users

CC-X SERIES BLADES are intended for professionals who regularly cut abrasive masonry materials:

Common use cases:

• Cutting concrete blocks and CMU for walls, partitions, and foundations.

• Cutting clay and structural bricks for masonry walls, veneers, and repairs.

• Cutting sandstone and other soft stones for architectural and landscape work.

• Cutting manufactured soft stone units used in veneer and façade systems.

Ideal users include:

• Masonry contractors who primarily cut block and brick.

• Hardscape contractors cutting pavers and soft stone units (with a focus on abrasive products rather than high‑density porcelains).

• Fabrication shops that specialize in architectural masonry and softer natural stones.

• Rental yards supplying block saws with a durable, general‑purpose masonry blade that stands up to multiple customers and varied abrasive materials.

By focusing on the materials that wear blades fast—block, brick, sandstone, soft stone—IMER CC-X blades provide a durable, cost‑effective option for high‑throughput, everyday masonry cutting.

Why Choose IMER – CC-X SERIES BLADES – Segmented Premium Masonry Blades?

IMER – CC-X SERIES BLADES – Segmented Premium Masonry Blades are a strong choice if you need a segmented premium masonry blade specifically tuned for abrasive masonry materials like block, brick, sandstone, and soft stone. Available in 10", 14", and 20" diameters with a 1" arbor and thicknesses from 0.110" to 0.155", they fit most professional block and masonry saws and are rated for both wet and dry cutting.

Compared to general‑purpose blades, CC‑X segmented rim blades provide better life and cutting performance in abrasive materials, while IMER’s broader blade lineup (LTS‑X, TGM‑X, SB707) covers harder concrete, tile, and stone applications. For contractors and shops focused on block and brick work, IMER CC-X SERIES BLADES deliver the targeted performance, durability, and value expected from a segmented premium masonry blade designed by a leading masonry equipment manufacturer.