HUSQVARNA K 4000 WET 14" (REPLACED K 3000 WET) -  967084001

NOTE: BLADE ON SAWS IN PICTURE ARE NOT INCLUDED : BLADES MUST BE PURCHASED SEPARATELY

HUSQVARNA K 4000 WET 14" (Replaced K 3000 WET) – 967084001: Complete Buyer’s & Operator’s Guide

The HUSQVARNA K 4000 WET 14" (part number 967084001) is a professional electric power cutter built for fast, accurate cutting with minimal dust—especially in indoor or enclosed jobsite environments. As the updated replacement for the K 3000 WET, the K 4000 WET keeps the same mission: deliver jobsite-tough cutting performance while using a wet cutting kit to control airborne silica and manage slurry efficiently. 

If you’re cutting concrete, masonry, block, pavers, or stone and want a cutter that’s easier to run indoors than a gas saw, the K 4000 WET is a smart, contractor-friendly option. This guide covers what it is, what it’s best for, real-world specs, how to choose blades, best practices, maintenance, and the FAQs buyers ask most.

---

What the Husqvarna K 4000 WET (967084001) Is Designed For

The K 4000 WET is an electric all-round cutter that prioritizes wet cutting to reduce dust. Husqvarna positions the K 4000 as a high-precision power cutter with a 14-inch max blade and 5-inch max cutting depth, making it a strong fit for a wide range of cutting tasks. 

It’s especially useful for:

• Indoor cutting where zero engine emissions matter 

• Concrete and masonry cuts for remodels, commercial interiors, and service work

• Block, brick, and pavers for hardscape and masonry crews

• Trimming openings and cut-outs where precision and control count

• Dust-controlled workflows, using water or (with an optional accessory) a vacuum-based setup 

Because it’s electric, you don’t deal with fuel mixing, engine tuning, or exhaust—making it a practical saw for contractors moving between indoor and outdoor jobs.

---

Key Specifications You Should Know

Here are the core specs most buyers look for when choosing the K 4000 WET 967084001:

• Blade diameter (max): 14 in

• Cutting depth (max): 5 in 

• Rated input power: 2.4 hp 

• Voltage: 100–120 V 

• Frequency: 50–60 Hz 

• Weight: 16.8 lbs

• Arbor diameter: 1 in 

• Blade thickness (max): 0.22 in Sound pressure at operator ear: 95 dB(A) (commonly listed) 

And importantly, the exact model variant shown on Husqvarna’s product page lists:

• “POWER CUTTER K 4000 120 V | NA”

• Art nr: 967 08 40-01 (i.e., 967084001) 

These specs make it clear what kind of cutter this is: a high-precision 14-inch, 5-inch-depth electric saw built for professional cutting without the complications of a gas powerhead.

---

Why It Replaced the K 3000 WET

Many dealers and distributors label the K 4000 WET as the unit that replaces the K 3000 WET. 

For buyers, that replacement note matters because it signals:

• Updated platform and parts support

• Continued focus on wet cutting and dust control

• Similar target use cases (concrete/masonry cutting, often indoors)

If you previously ran a K 3000 WET, the K 4000 WET is the modern equivalent you’ll see stocked and supported most widely.

---

What Makes the K 4000 WET Different from Typical Cut-Off Saws

Electric, zero-emission operation (ideal for indoor work)

Husqvarna calls out the K 4000 as “perfect for indoor use,” which is a major advantage for contractors working in occupied buildings or enclosed spaces. 

Wet cutting kit reduces dust and helps meet jobsite controls

Wet cutting dramatically reduces airborne dust, including respirable silica (when properly applied), and it keeps the blade cooler—often improving cut quality and blade life. Husqvarna and multiple resellers describe the K 4000 WET as minimizing water and slurry while cutting efficiently. 

Forward-rotating (“pulling”) blade behavior

Husqvarna describes a “pulling” rotation on the K 4000 product page, and many sellers note the forward-rotating blade design. This can help the saw cut into the material efficiently with reduced operator effort compared with some traditional rotations. 

Overload protection for jobsite resilience

The K 4000 page highlights overload protection, which helps protect the motor during demanding cuts. 

---

Best Uses for a 14" / 5" Depth Electric Cutter

A 14-inch blade with a 5-inch cutting depth is a sweet spot for a lot of contractor work. It’s not meant to replace the biggest gas saws on deep roadwork—but it shines in:

• Doorway/threshold and interior slab cuts

• Block and brick trimming and shaping

• Hardscape cuts (pavers, retaining wall block, landscape stone)

• Concrete repair where you need controlled, clean cuts

• Jobsites with strict dust or emissions requirements

If your typical cuts are in the 2–5 inch range and you value indoor usability, the K 4000 WET is purpose-built for that world.

---

Choosing the Right Blade for the K 4000 WET

The saw is only as good as the blade you mount. Since the K 4000 WET uses a 14-inch blade and commonly listed 1-inch arbor, match your blade accordingly. 

Pick the blade based on material

• Cured concrete: choose a concrete/aggregate-appropriate diamond blade

• Green concrete: use a softer bond blade designed for early-age concrete

• Block/brick: general masonry blades work well

• Stone/pavers: choose stone-rated blades if you’re cutting dense materials regularly

Match wet or dual-use rating

Because this is a wet cutting setup, wet-rated blades are typically ideal. If you plan to convert to dry cutting (with an accessory), make sure your blade is rated accordingly.

---

Wet Cutting Tips for Cleaner Cuts and Longer Blade Life

Use consistent water flow

The goal is cooling and dust suppression without flooding the cut. Consistent flow helps prevent overheating and reduces glazing.

Let the blade work—don’t force it

Forcing the cut can trip overload protection or slow the motor, and it can cause premature blade wear. Keep a steady feed rate.

Score, then deepen for cleaner edges

For visible edges or brittle materials, a shallow scoring pass reduces chipping, then follow with a deeper pass.

Keep slurry under control

Wet cutting reduces airborne dust, but it creates slurry. Plan for containment, cleanup, and safe disposal according to site rules.

---

Converting for Dry Cutting (When Wet Isn’t Practical)

Some sellers and FAQs note the K 4000 can be adapted for dry cutting using a vacuum/dust-reducer accessory (often referred to as a “Vac” attachment). 

Dry cutting can be useful when water is not allowed (finished interiors, sensitive electrical areas, etc.), but it requires:

• A proper dust control setup (vacuum rated for fine dust)

• Correct PPE

• Breaks to manage heat, depending on blade and material

---

Maintenance Basics for Reliability

Even electric saws need routine checks. Here are simple habits that keep the K 4000 WET ready:

• Inspect cord and power connection before every job

• Check blade condition (segments, core, cracks) before mounting

• Clean water delivery components to prevent clogs

• Wipe down slurry after wet cutting—slurry hardens and becomes difficult to remove

• Store properly to protect the cutter and accessories from freezing water or jobsite impacts

Because the K 4000 WET is relatively lightweight (about 16.8 lbs), it’s easy to transport—but don’t let that trick you into rough handling. 

---

Safety Considerations (Indoor & Outdoor)

• Wear eye protection and hearing protection (operator ear levels commonly listed around 95 dB(A)).

• Use GFCI-protected power when working in damp environments

• Control slurry, prevent slips, and keep the work area organized

• Verify blade RPM rating is compatible with the tool

• If dry cutting, use proper dust controls and a respirator as required by jobsite rules

---

Frequently Asked Questions

What is the Husqvarna K 4000 WET 967084001?
It’s a 120V electric power cutter designed for wet cutting with a 14-inch max blade and 5-inch max cutting depth, often used for concrete and masonry. 

Does the K 4000 WET replace the K 3000 WET?
Yes—many distributors and listings specify it replaces the K 3000 WET. 

What is the maximum cutting depth?
Husqvarna lists the max cutting depth as 5 inches. 

What blade size does it use?
The K 4000 platform supports a maximum 14-inch blade. 

What power does it run on?
Common specs list 100–120V, 50–60 Hz. 

What is the arbor size?
Common published specs list a 1-inch arbor diameter. 

Is it suitable for indoor cutting?
Yes—Husqvarna positions it as “perfect for indoor use,” and retailers commonly highlight its zero-emission electric operation. 

Can it be used for dry cutting too?
It’s commonly described as adaptable for dry cutting with a vacuum/dust-reducer accessory. 

Does it include a blade?
Some retailer listings note that blades pictured may not be included and must be purchased separately—always confirm what’s included on the product page you’re buying from. 

How heavy is it?
Husqvarna lists the weight around 16.8 lbs, making it relatively easy to maneuver compared with many gas cut-off saws. 

---

Final Takeaway

The HUSQVARNA K 4000 WET 14" (967084001) is a highly practical choice for contractors who want precision, dust control, and indoor-friendly cutting in a professional electric cutter. With a 14-inch max blade, 5-inch max cutting depth, and features like overload protection and a wet cutting design that minimizes dust and slurry, it’s built for real jobsite efficiency—especially where clean, controlled cutting matters most.