Replacement Poly Drum for Imer Wheelman II 5 cu. ft. Portable Mixer

Features

• Replacement yellow poly drum for the IMER Wheelman 5 cubic foot portable wheelbarrow style mixer
• The drum comes with paddles
• This poly drum will also fit the IMER Minuteman 5 cf portable mixer

Imer Minuteman Replacement Poly Drum with Paddles is a genuine OEM drum assembly that includes a new poly mixing drum and a full set of internal paddles, designed to restore or upgrade your IMER Minuteman II portable multi‑mixer to like‑new performance. Instead of buying a bare shell, this replacement kit gives you a complete poly drum ready to bolt onto your existing Minuteman frame and gearbox, so you can get back to mixing concrete, mortar, stucco, and more with minimal downtime.

Overview of the Imer Minuteman Replacement Poly Drum with Paddles

The Imer Minuteman Replacement Poly Drum with Paddles is marketed by dealers as a “replacement poly drum for Imer Minuteman” that ships with the paddles included. It is the same type of drum assembly used on the factory Minuteman II poly‑drum model (Model #1126632), which is a 5 CF beltless, gear‑driven 0.5 HP portable mixer with tripod stand.

IMER’s own Minuteman Multi‑Mixer page describes the Minuteman II as “the highest performing, most reliable, and affordable small portable mixer,” available with either a metal or poly drum, and notes that it has been used for over 30 years for block buildings, stucco, patios, and even rock tumbling. The replacement poly drum kit is the OEM drop‑in drum package for those machines.

Compatibility: Which Mixers It Fits

The Imer Minuteman Replacement Poly Drum with Paddles is designed for the IMER Minuteman II poly‑drum mixers and frames. Typical compatible equipment includes:

• IMER Minuteman II Portable 5 CF Mixer with Tripod Stand – 120V 0.5 HP, Poly Drum (Model #1126632).

• Earlier or equivalent Minuteman models designed for a poly drum, when used with the proper frame and gearbox pattern (verify by serial number/parts diagram if unsure).

IMER’s parts catalog lists “Minuteman Poly Drum” separately from “Minuteman Steel Drum,” confirming that the poly drum is a distinct OEM part family for the Minuteman series. The replacement kit with paddles is meant to bolt directly onto that Minuteman II frame and gear‑drive setup without modification.

If you have a Wheelman II or a steel‑drum Minuteman, you should confirm compatibility before ordering, as those use different drum part numbers (e.g., Wheelman Poly Drum 1188810 vs. Minuteman Poly Drum).

What’s Included in the Replacement Poly Drum Kit

Unlike some steel drum replacements that ship bare, the Imer Minuteman Replacement Poly Drum with Paddles comes as a more complete assembly. According to HandGearPro’s product listing and other IMER parts sources:

Included:

• OEM poly mixing drum for the IMER Minuteman (5 CF nominal capacity).

• Internal mixing paddles (blades) installed or supplied with the drum.

Not included:

• Main frame, tripod stand, or legs.

• Gearbox or drive components.

• Electric motor (0.5 HP motor is part of the mixer, not the drum kit).

Having the paddles included is a major convenience and value point, because paddles are wear items and often need replacing along with a damaged drum. IMER USA Direct highlights that they stock all paddle rubbers and paddle parts for IMER mixers, including Minuteman and Wheelman, but this specific kit saves you from having to source paddles separately.

Poly Drum Construction and Benefits

The replacement poly drum is built from heavy‑duty, impact‑resistant plastic sized for a 5 CF Minuteman II mixer. Compared to steel drums, the OEM poly drum offers several advantages:

• Corrosion resistance

  • Poly plastic does not rust, making it ideal for users who frequently leave the mixer outdoors or clean with water and chemicals.

• Reduced material sticking

  • Many users find that concrete and mortar stick less aggressively to poly surfaces, making cleaning easier at the end of the day.

• Lower weight

  • The poly drum is lighter than a steel drum, making the mixer easier to move and tip on its tripod stand.

• Noise reduction

  • Poly drums often transmit less noise than steel, which pairs well with the Minuteman’s quiet 0.5 HP electric motor for indoor or residential work.

IMER’s Minuteman Multi‑Mixer page notes that the mixer is designed to be quiet and suitable for indoor applications, and the poly drum supports that design goal.

Paddle Design and Mixing Performance

The paddles included with the Imer Minuteman Replacement Poly Drum are the factory‑specified mixing blades for Minuteman II poly‑drum mixers. IMER describes the Minuteman as having aggressive paddles to mix fast and complete, ensuring good material turnover inside the drum.

Key performance aspects:

• Fast blending of sand, cement, and aggregates for concrete and mortar.

• Effective folding action of stucco or plaster mixes.

• Suitable for rock tumbling and specialty mixing applications noted by IMER.

Because the paddles are OEM parts, they maintain the correct clearance and angle relative to the poly drum interior, which is important for both mixing efficiency and preventing damage to the drum walls.

When to Replace Your Minuteman Poly Drum and Paddles

Upgrading to an Imer Minuteman Replacement Poly Drum with Paddles is recommended when:

• The existing poly drum is cracked, gouged, or deformed from impacts or freezing conditions.

• The interior surface is badly worn or scarred, causing material to stick or not mix properly.

• Paddles have become worn, warped, or are missing, leading to incomplete mixing or unbalanced loads.

• You want to recondition an older Minuteman II that still has a solid motor and frame but a tired drum.

Since the Minuteman II’s gear‑driven motor and frame often remain serviceable for many years, replacing the drum and paddles is a cost‑effective way to extend the mixer’s working life.

Installation and Fitment Considerations

Although detailed instructions are in IMER’s mixer manuals, the basic steps for installing the Imer Minuteman Replacement Poly Drum with Paddles usually include:

1. Removing the old drum

   • Detach any retaining hardware between the drum and the gear output hub.

   • Carefully lift or slide the old drum off the shaft or drive interface.

2. Inspecting the drive and seals

   • Check the gear output, keys, and any seals for wear or damage.

   • Clean off hardened material around the mounting area.

3. Mounting the new poly drum

   • Align the new drum’s mounting flange or hub with the drive interface.

   • Install bolts or fasteners in the pattern indicated in IMER’s parts diagram.

4. Verifying paddle clearance

   • Rotate the drum by hand to ensure paddles do not contact the drum walls or frame.

5. Test run

   • Run the mixer briefly empty to check for vibration or unusual noises before loading material.

IMER’s Minuteman II parts page and manuals provide exploded diagrams that help confirm how the drum, paddles, and hardware fit together.

Poly Drum vs. Steel Drum for the Minuteman

IMER offers Minuteman II mixers in both poly and steel drum configurations, and IMER USA Direct lists separate “Minuteman Poly Drum” and “Minuteman Steel Drum” parts. Choosing a poly drum replacement instead of switching to steel makes sense when:

• You value corrosion resistance and easier cleaning.

• You primarily mix mortar, stucco, or lighter concrete loads.

• You want to retain the original quiet, lighter‑weight character of the Minuteman II poly‑drum mixer.

Steel drums are preferred by some for very heavy, frequent concrete mixing and extreme jobsite abuse, but for many small contractors and homeowners, the poly drum offers a great balance of durability, weight, and ease of maintenance.

Benefits of Choosing a Genuine Imer Minuteman Replacement Poly Drum with Paddles

Using the OEM replacement kit offers several important benefits over generic or improvised solutions:

• Perfect fit

  • The drum and paddles are designed precisely for the Minuteman II, ensuring proper mounting, balance, and mixing geometry.

• Restored performance

  • New paddles and a fresh drum interior help the mixer achieve its original mixing speed and completeness, reducing unmixed pockets and dead spots.

• Long‑term reliability

  • IMER parts are tested for use with their gear‑driven 0.5 HP motor and tripod frame, reducing the risk of premature failure or misalignment.

• Simplified ordering and support

  • Using the correct kit (clearly labeled as “Imer Minuteman Replacement Poly Drum with Paddles”) makes it easier to get support and future parts from IMER dealers.

Why the Imer Minuteman Replacement Poly Drum with Paddles is a Smart Upgrade

If you rely on an IMER Minuteman II poly‑drum mixer and your existing drum is worn, cracked, or missing paddles, the Imer Minuteman Replacement Poly Drum with Paddles is the factory‑correct way to restore your mixer to full, reliable performance. You get a new, impact‑resistant OEM poly drum and aggressive mixer paddles designed for fast, complete mixing—ready to bolt onto your existing Minuteman frame and 0.5 HP motor.

For masons, stucco crews, contractors, and serious DIYers who appreciate the Minuteman’s quiet operation and portable design, investing in the Imer Minuteman Replacement Poly Drum with Paddles extends the life of a proven mixer and ensures that every batch of concrete, mortar, or stucco is mixed quickly, thoroughly, and consistently on jobsites for years to come.