IMER – MIX-ALL 60 (FORMERLY MINI-MIX) – 14 Gallon/50lb Bag Capacity Mixer is a compact, vertical‑shaft paddle mixer designed to give contractors a powerful, ultra‑portable solution for mixing mortar, stucco, grout, thin set, dry‑pack, epoxy, plaster, and other specialty materials. With a 14 gallon drum, 12 gallon batch output (one full 50 lb bag), and a 0.75 HP 110V motor, it delivers fast, consistent mixing while remaining light enough for true one‑person transport and setup.

Overview of the IMER MIX-ALL 60 (Formerly Mini-Mix)

The IMER MIX-ALL 60, model 1193988, is the updated version of the popular Mini‑Mix 60 vertical shaft mixer. It is a bucket‑style paddle mixer where the drum stays stationary and a vertical shaft with paddles rotates to mix the material. This design produces an extremely thorough mix, even for stiff or specialty products, and is much quieter than many traditional drum mixers.

IMER positions the Mix‑All 60 as a lightweight, quiet, portable yet powerful mixer that “can go anywhere and allows true one person repair work made easy.” It includes two 12 gallon plastic mixing buckets, so you can mix in one bucket while prepping another, making it ideal for small to medium jobs, repair work, and interior projects where access and noise are a concern.

Key Specifications and Technical Data

The IMER – MIX-ALL 60 (FORMERLY MINI-MIX) – 14 Gallon/50lb Bag Capacity Mixer is built around a robust motor/gearbox drive and a 14 gallon drum/bucket system.

Core specs

From IMER USA and multiple distributors:

• Model: Mix‑All 60 Vertical Shaft Mixer (formerly Mini‑Mix 60)

• Model number: 1193988

• Drum capacity: 14 gallons

• Batch output: 12 gallons / 50 lb bag (up to 60 lb bag in some specs)

• Drum/bucket diameter: 24 in

• Maximum aggregate size: 3/8 in

• Motor rating: 0.75 HP (3/4 HP) 110–120V, ~10 amp, single phase

• Paddle speed: 55 RPM

• Noise level: Approximately 65–70 dB at operator position

• Machine weight: About 64–67 lb (70 lb boxed)

• Dimensions (L × W × H): About 25" × 23" × 31–32"

• Wheels: 4 in wheelbarrow‑style pneumatic or flat‑free wheels

These specs show how the Mix‑All 60 combines a serious 3/4 HP gear‑drive motor with a compact footprint and low weight, making it easy to roll like luggage through doorways, up ramps, and even into attics or upper floors.

Vertical Shaft “Bucket Mixer” Design

Unlike traditional tilting drum mixers, the IMER MIX-ALL 60 uses a vertical shaft mixing system inside a stationary bucket.

Key design features include:

• Stationary drum/bucket: The 14 gallon plastic drum stays fixed, reducing splashing and making loading/unloading easier.

• Vertical shaft paddles: A central shaft with specially shaped paddles rotates at 55 RPM to quickly and thoroughly mix material from top to bottom.

• High‑torque gearbox drive: The 110V motor drives the paddles through a direct gear‑box, with no external belts, for improved reliability and quiet operation.

This vertical shaft design is particularly effective for:

• Mortar and stucco (including colored and specialty mixes)

• Thin set and large‑format tile mortar

• Dry pack / deck mud and floor mud

• Epoxy mortars, grouts, and coatings

• Plaster and decorative overlays

Because the paddles cut through the mix rather than just tumbling it, the mixer can handle low‑slump, stiff materials that are difficult to blend in standard barrel mixers.

Mixing Capacity and Compatible Materials

IMER – MIX-ALL 60 (FORMERLY MINI-MIX) – 14 Gallon/50lb Bag Capacity Mixer is designed around common bag sizes and professional‑grade materials.

From IMER and distributor specifications:

• Output per batch:

  • One full 50 lb (or 60 lb, depending on product) bag of premixed material

  • Approximately 12 gallons of finished mix

• Typical materials:

  • Mortar (Type N, S, etc.) – approx. 1/3 bag per batch for some mixes

  • One 60 lb premix bag per batch; up to two 50–60 lb bags of self‑leveling underlayment (due to more fluid consistency)

  • Mortar, stucco, grout, thin set, dry pack mortar, epoxy, plaster, and similar products

ContractorsDirect and other suppliers highlight that the Mix‑All 60 is not intended as a large concrete mixer for heavy aggregate, but it excels with mortar‑type mixes, specialty coatings, and repair products where consistency is critical.

Portability and One‑Person Operation

One of the biggest advantages of the IMER Mix‑All 60 is its extreme portability.

Portability features include:

• Lightweight body (~64–67 lb), easily handled by one person

• 4 in wheelbarrow‑style wheels that allow the unit to roll like a piece of luggage

• Compact footprint (about 25" × 23") for passing through standard doors and tight spaces

• 110V/120V, 10 amp motor that plugs into any standard household or jobsite outlet

IMER and dealers note that you can roll the Mix‑All 60 into attics, basements, elevators, and rooftop areas where traditional mixers cannot go. For fast production, they even suggest lining up two or three units so that one is always mixing while another is being loaded or poured.

Included Buckets, Paddles, and Accessories

IMER – MIX-ALL 60 (FORMERLY MINI-MIX) – 14 Gallon/50lb Bag Capacity Mixer usually comes as a complete kit ready to work.

Most packages include:

• Two 12 gallon plastic mixing buckets (14 gallon capacity)

• One standard mixing paddle (good for mortar, stucco, grout)

• 3/4 HP 110V motor with high‑torque gearbox drive

• 4 in wheels and handle for easy transport

IMER offers optional paddles and accessories, such as:

• Fine mortar mixing paddle for specialty mortars and grouts

• Additional bucket packs (5‑pack of buckets) for higher production workflows

These options let you tailor the Mix‑All 60 to specific applications, from epoxy and overlay work to stucco and grout production.

Typical Applications and Trades That Use the Mix-All 60

The Mix‑All 60 is widely used across several trades because of its versatility and portability. Common applications include:

• Tile and stone installers:

  • Mixing thin set, medium‑bed mortars, leveling compounds, and deck mud for bathrooms, kitchens, and small floors.

• Masonry contractors:

  • Mixing small batches of mortar for brick, block, or repair work, especially on upper floors or tight sites.

• Concrete countertop and decorative concrete shops:

  • Mixing GFRC face coats, backer coats, and small overlay batches.

• Waterproofing and epoxy contractors:

  • Mixing epoxy mortars, coatings, and fillers where clean, consistent blending is critical.

• Stucco and plaster trades:

  • Mixing specialty stuccos and plasters for patching and small façade areas.

Because it is small, quiet, and 110V‑powered, the IMER – MIX-ALL 60 is particularly valuable on interior renovation and repair jobs where access is limited and noise must be controlled.

Safety, Noise Level, and Ergonomics

The Mix‑All 60 is designed with operator safety and comfort in mind.

Key safety and ergonomics features:

• Protective cover over the mixing area to help keep hands away from spinning paddles.

• Quiet operation at about 65–70 dB, thanks to the direct gearbox drive and vertical shaft design.

• Comfortable working height with a low center of gravity, reducing strain while loading bags and buckets.

• Simple on/off controls, with no belts or exposed drive components.

These features make it safer and less tiring to use throughout the day, especially in confined or occupied spaces.

Maintenance, Cleaning, and Durability

IMER builds the MIX-ALL 60 (formerly Mini‑Mix) as a durable, contractor‑grade mixer with minimal maintenance requirements.

Maintenance and cleaning best practices include:

• Rinsing the bucket and paddles immediately after use to prevent material buildup.

• Periodically checking the gearbox, shaft, and fasteners for wear or looseness.

• Ensuring the 110V cord and plug are in good condition.

Since the motor uses a direct gearbox drive, there are no external belts to tension or replace, which significantly reduces routine maintenance compared to many drum mixers. The plastic buckets are also easy to clean or replace, and the machine’s steel frame is robust enough for daily professional use.

Why Choose IMER – MIX-ALL 60 (FORMERLY MINI-MIX) – 14 Gallon/50lb Bag Capacity Mixer?

IMER – MIX-ALL 60 (FORMERLY MINI-MIX) – 14 Gallon/50lb Bag Capacity Mixer is an excellent choice if you need a truly portable, electric paddle mixer that can handle one full 50 lb bag of premixed material per batch with professional consistency. Its 14 gallon vertical shaft design, 12 gallon batch output, 3/4 HP 110V motor, high‑torque gearbox, and included buckets and paddles make it a complete, ready‑to‑work solution for mortar, stucco, grout, thin set, dry pack, epoxy, plaster, and more.

For tile setters, masons, decorative concrete artisans, and repair contractors who work in tight spaces, upper floors, or sensitive interior environments, the Mix‑All 60 offers a unique combination of power, portability, quiet operation, and mix quality that standard drum mixers cannot match.