Imer Mix All Replacement Bucket (5 Pack)

Features

• 4 handle new style bucket for mix all mortar mixer
• 14 gallon bucket capacity
• Batch output: 12 gal / 60 lb. bag
• Fits mini mix 60 models

The Imer Mini-Mix All Replacement Bucket (5 Pack) is a convenient, cost‑effective replacement bucket set designed for the IMER Mix All 60 / Mini‑Mix 60 portable mortar mixer, giving contractors multiple 14‑gallon mixing buckets to keep production moving on busy jobs. Sold under SKU 1193968K, this 5‑pack includes new‑style 4‑handle buckets with a 14‑gallon capacity and a batch output of about 12 gallons (one 60 lb bag) per bucket, specifically engineered to fit the Mini‑Mix 60 / Mix‑All 60 models.

What is the Imer Mini-Mix All Replacement Bucket (5 Pack)?

The Imer Mini-Mix All Replacement Bucket (5 Pack) is a multi‑bucket replacement set for the IMER Mix All 60 / Mini‑Mix 60 vertical shaft mixer.

Compatibility: Mini-Mix 60 / Mix-All 60 mixers

A crucial point is that the Imer Mini-Mix All Replacement Bucket (5 Pack) is made to fit Mini‑Mix 60 and Mix All 60 mortar mixer models.

Retailers and spec pages state:

• 4 handle new style bucket for Mix All mortar mixer.

• Fits Mini Mix 60 models.

Capacity and performance

Each bucket in the Imer Mini-Mix All Replacement Bucket (5 Pack) is a heavy‑duty, high‑capacity mixing bucket tuned to the Mini‑Mix 60’s performance specs.

From Contractors Direct’s technical notes:

• Bucket capacity: 14 gallons.

• Batch output: approximately 12 gallons / 60 lb bag (of mortar or similar material).

What this means in practice:

• The 14‑gallon capacity gives enough room for a full 60 lb bag plus water and additives, while still allowing the paddles to mix thoroughly.

• The 12‑gallon batch output is ideal for mortar, stucco, grout, and similar products that the Mini‑Mix 60 is built to handle.

By using OEM buckets, you maintain the designed ratio of volume, paddle clearance, and mixing dynamics that IMER engineered into the Mini‑Mix system.

4-handle new-style bucket design

The Imer Mini-Mix All Replacement Bucket (5 Pack) features IMER’s updated 4‑handle “new style” bucket.

Key design elements:

• “4 handle new style bucket for Mix All mortar mixer.”

Advantages of the 4‑handle design:

• Easier lifting and dumping: Multiple handles give better grip when moving or emptying the bucket, especially when full of mortar or grout.

• Better control when pouring into wheelbarrows, tubs, or forms.

• Improved ergonomics for two‑person handling on larger or heavier mixes.

The new‑style bucket is an evolution of IMER’s earlier designs and is built to hold up to regular use on construction, masonry, and tile jobs.

Benefits of buying the 5‑pack:

• Minimize downtime: Having multiple buckets ready allows you to keep mixing while another bucket is curing, cleaning, or being transported.

• Cost savings: The 5‑pack is typically cheaper per bucket than buying five single buckets.

• Ideal for crews: Multiple buckets let different team members stage materials, mix different colors or products, and maintain a continuous workflow.

• Less frequent ordering: Stocking a 5‑pack means you’re less likely to be caught short by a damaged or worn bucket mid‑project.

For busy masonry, tile, and restoration professionals, the 5‑pack is a practical way to keep the Mini‑Mix 60 running at full efficiency.

Typical applications

With the Imer Mini-Mix All Replacement Bucket (5 Pack) installed on your Mini‑Mix 60, you can mix a variety of materials commonly used in construction and finishing.

The Mini‑Mix 60/Mix All 60 platform is widely used for:

• Mortar for brick, block, and stone work.

• Stucco and plaster mixes.

• Grout for masonry and tile.

• Concrete (small batch, fine aggregate) for patching and small pours.

• Underlayments, repair mortars, and specialty mixes where controlled batch size matters.

The replacement buckets maintain the original mixer’s performance, supporting consistent mix quality from batch to batch.