Imer Outer Blade Guard 200VA

SKU: 3226080

Regular price: $25.34
Sale price: $25.34
Unit price: per

Shipping calculated at checkout.

Quantity must be 1 or more

Imer Outer Blade Guard 200VA 3226080

Features

8" blade guard

The Imer Outer Blade Guard 200VA is a genuine OEM safety and protection cover designed specifically for the IMER Combi 200 VA rail wet saw. It protects the outer portion of the 8" diamond blade, shields the operator from contact and debris, and helps control water spray around the cutting area, all while preserving the saw’s factory performance and safety rating.

What Is the Imer Outer Blade Guard 200VA?

The Imer Outer Blade Guard 200VA (often referenced by IMER and parts dealers as blade guard outer – Combi 200 VA) is the replacement outer guard that mounts around the exposed side of the blade on the Combi 200 VA tile saw. It is part of the overall blade protection assembly that encloses the upper and outer portions of the 8" blade, working together with the inner blade guard and spray shield to create a safe, controlled cutting environment.

This outer guard is shaped to fit the Combi 200 VA cutting head, aligning with the saw’s integrated water distribution and blade cover system so that the blade is shielded without interfering with cutting capacity.

OEM Part Numbers and Naming

Different sites and documents may reference the outer blade guard with slightly different naming, but they describe the same part used on the Combi 200 VA.

Common identifiers include:

“Imer Outer Blade Guard 200VA” – typical retail product title.
“3226080 IMER Blade Guard Outer / Saw” – parts listing description tying the code to the 200VA saw.
“BLADE GRD OUTER-C200VA” – IMER parts catalog wording (e.g., code 21243MER or similar internal ID).

All of these refer to the same outer guard component for the Combi 200 VA tile saw’s blade protection assembly.

How the Outer Blade Guard Fits the Combi 200 VA

The IMER Combi 200 VA is an 8" overhead rail wet saw with a cutting head that rides on a guide beam and is equipped with a full blade guard and integrated water system. The saw’s manual describes:

A blade guard that surrounds the blade and houses the water distributor for cooling.
A spray shield and front guard piece that can be removed when changing blades.
Protection devices that must be fitted before operation for safe use.

Within this assembly, the outer blade guard is the external portion that covers the outside of the spinning blade, working in tandem with the inner guard to create a complete enclosure around the upper circumference.

Safety and Protection Functions

The primary role of the Imer Outer Blade Guard 200VA is operator protection, but it also provides several secondary benefits.

Key functions:

Physical shielding: It covers the exposed outer side of the blade, reducing the risk of accidental contact with the rotating diamond blade.
Debris containment: The guard helps contain chips, slurry, and fragments created during cutting, keeping them within the cutting zone instead of ejecting them toward the operator.
Water control: It works with the inner guard and spray shield to keep cooling water on the blade and in the pan, minimizing overspray and splashing.
Blade protection: By shielding the blade from impact or accidental knocks when the machine is being moved or stored, it helps extend blade life.

The Combi 200 VA manual stresses that all guards must be installed before use and that altering or removing guards during operation is prohibited, highlighting the importance of having an intact outer blade guard.

Material and Construction

While specific material details are not always listed in short product descriptions, the outer blade guard for the Combi series is generally a molded guard engineered to be durable, corrosion‑resistant, and compatible with water cooling.

Parts listings for related Combi saws describe “plastic outer blade guard” components designed to protect the outer blade from damage and debris.
IMER’s saw catalog notes that blade guards are designed for easy removal for blade changes and incorporate impact‑protection and sound‑control features, depending on model.

The Outer Blade Guard 200VA follows this design language: a shaped guard that is robust enough for jobsite use but light enough not to stress the cutting head or rails.

Difference Between Outer and Inner Blade Guards

On the Combi 200 VA (and larger Combi saws), the blade protection assembly is divided into inner and outer sections, sometimes complemented by a spray shield.

Outer Blade Guard 200VA: Covers the outer side of the blade, facing away from the motor, and forms the main external shield.
Inner Blade Guard 200VA: Protects the inner side of the blade, closer to the motor and arbor, and helps direct water and debris away from internal components.
Spray Guard / Spray Shield: A front shield that manages water spray and keeps the operator area cleaner.

When fully assembled, the inner guard, outer guard, and spray shield form a continuous enclosure around the upper portion of the blade, with a slot at the bottom where the blade meets the material.

When to Replace the Outer Blade Guard

You should replace the Imer Outer Blade Guard 200VA whenever it is damaged, missing, or deformed enough that it no longer fits or protects properly.

Common reasons for replacement:

Cracks or breaks from impact or drops.
Warping that causes interference with the blade or cutting head travel.
Missing guard due to loss or prior removal.
Excessive wear, holes, or damage that prevent proper debris or water containment.

The Combi 200 VA manual requires all protection devices to be in place before operation; running the saw without a proper outer blade guard is unsafe and contrary to the manufacturer’s instructions.

OEM vs. Non‑OEM Blade Guards

The Outer Blade Guard 200VA is a shaped, safety‑critical component, so using a genuine IMER part is strongly recommended.

Advantages of OEM:

Precise fit to the Combi 200 VA cutting head and existing mounting points.
Correct clearance to the 8" blade and water feed components, avoiding contact or misalignment.
Compliance with the saw’s original safety design and manual requirements.
Durable materials matched to water, slurry, and jobsite use.

Generic or improvised guards may not align correctly, could interfere with blade rotation or water flow, and may compromise operator safety.

When working on the blade guard system, contractors often see or order related parts at the same time.

Common related parts:

Inner Blade Guard 200VA – protects the inner side of the blade and internal components.
Spray Guard / Spray Shield – controls water spray and keeps the operator area cleaner.
Blade guard hardware – bolts, nuts, brackets, and clips that hold the inner and outer guards to the cutting head.

If you’re rebuilding or refurbishing a Combi 200 VA head assembly, it often makes sense to inspect all three components and replace any that are worn or damaged.

Where the Outer Blade Guard 200VA Is Used

The Imer Outer Blade Guard 200VA is specific to the Combi 200 VA tile saw model and its blade protection assembly.

Parts platforms group it under “Combi 200VA Tile Saw Blade Guard Parts,” confirming both model and function.
Catalog lists and third‑party parts pages reference the code associated with the C200VA outer blade guard and list it under Combi 200 VA saw components.

Larger Combi saws (such as the Combi 250 VA or 250/1500 VA) use different outer blade guards matched to their 10" blade size and longer cutting heads, so those guards are not interchangeable with the 200VA guard.

Purchasing and Identification Tips

To ensure you get the correct Imer Outer Blade Guard 200VA, pay attention to:

Model name on your saw: “Combi 200 VA” or equivalent plate information.
Product description specifying “Outer Blade Guard 200VA” or “Blade Guard Outer – C200VA.”
Seller confirmation that it is for the Combi 200 VA tile saw blade guard assembly.

If in doubt, cross‑reference the part against an exploded parts diagram for the Combi 200 VA blade guard assembly, where the outer guard appears as a dedicated line item.

Why the Imer Outer Blade Guard 200VA Matters

For professional tile contractors and saw owners, the Imer Outer Blade Guard 200VA is more than just a plastic cover—it is a core safety device that:

Protects the operator from contact with the 8" blade.
Helps contain debris and slurry for a cleaner work area.
Works with the water system to keep cooling where it belongs.
Preserves the saw’s original safety and performance characteristics.

If you’re building an SEO‑optimized product page around this part, you can confidently present the Imer Outer Blade Guard 200VA as the correct OEM outer blade cover for the IMER Combi 200 VA tile saw, essential for safe, clean, and compliant cutting.

Back to IMER