
FOAM-RUBBER SEAL
With continuous usages the seals wear out. When the GRABO seal finally wears out, the lifting capacity diminishes. In this case you can replace the worn seal by hand within seconds.
The Foam-Rubber Seal Type A1 is the secret behind GRABO's versatility, designed to grip heavily textured materials with ease. This patented, high-friction, closed-cell rubber seal fits all GRABO models, providing a tight, secure fit that keeps dust and debris out while revolutionizing your lifting experience. Though your GRABO tool comes with a seal, these replacement gaskets ensure you’re always prepared if the original gets damaged. This foam rubber seal enhances your tool’s efficiency and reliability.
Specifications:
Black foam seal | |
---|---|
Material | SBR rubber foam sponge |
Color | Black |
L x W x H | 11.5 x 6.9 x 0.7” (293 x 175 x 19 mm) |
Density | 10.6 Lb/cft (170 kg/m^3) |
Hardness, Shore C | ~10 +/-2 |
Tearing Pressure | 1800 Psi (126 kg/cm^2) |
Compression to 25% size at | 8.5 Psi (6000 kg/m^2) |
Water Absorption, % | <=5 |
Shrinkage at 160F (70C) for 24 hrs, % | <=20 |
Recommended Storage Temperature | Room temperature |
Red seal | |
Material | Silicon Foam |
Color | Red |
Density | 40.5 Lb/cft (650 kg/m^3) |
Hardness, Shore C | 55 +/-5 |
Water Absorption, % | <=4 |
Recommended Storage Temperature | Room temperature |